The USB 2.0 PC Camera came with the Lenova range of computers. You would find the camera in their ThinkCentre M70z as well as on the M90z which used the same camera. The driver for the USB2 camera has been added below in both the 32bit version as well as the 64 bit version of the software. If you have another setup then you can also see the article on for more information.
This driver was the last driver released in 2011. The operating systems for the camera has been listed as: • Windows 7 (32-bit) • Windows 7 (64-bit) • Windows Vista (32-Bit) • Windows Vista (64-Bit) • Windows XP (32-bit).
One of the recent issues being reported by customers with Windows 10 after upgrade is that the Windows Camera app fails to launch. In many cases it returns a generic 'Something went wrong' error when they launch the app. This issue mostly affects USB Web cameras that were upgraded from Windows 7. If your camera works fine in other apps, like Skype, or other third party camera apps, but the Windows Camera app fails to start, then here's some workarounds that can help you to resolve this issue. Update: Updated troubleshooting steps are now available at Microsoft Support here: Example 'Something went wrong' error Currently the workaround has two routes you can try to fix it, first would be to roll back to a previous version of the camera driver, second would be to uninstall the camera driver which will allow windows to install a generic camera driver.
Divx dts plugin serial number. First we'll discuss the rollback workaround. How to check your driver version: To see if the driver roll back option is applicable, you first need to check your driver version. To do this: • Right click (or for touch first devices tap and hold) the Windows button in the taskbar. A Menu should pop up. Select 'Device Manager' from the Menu Accessing Device Manager from the start menu • I n the device manager window, find 'Imaging Devices' and expand it by clicking the '>' to the left ( NOTE: In Windows 10, some cameras/webcams may show up under 'Sound, video and game controllers Locating Imaging devices in Device Manager • When you find your camera/webcam in the list, right click on it and select 'Properties.” From this “General” tab, note your camera driver manufacturer and model. You can use this information to contact your camera manufacturer should you need an updated driver Camera Driver Properties in Device Manager • In the 'Properties' dialog box, select the 'Driver' tab.
Driver Properties tab of selected camera device • Click the 'Driver Details' Button. You should see something like the image below. If you see entries in the dialog box below other than ' usbvideo.sys' or ' ksthunk.sys', rolling back the driver may address the issue. Click, 'OK', then continue to the section 'Rolling Back USB Camera Drivers'. Note: If your camera driver lists 'stream.sys' as an entry, your camera driver was designed before Windows 7 and will not work with modern camera applications. Contact your manufacturer for an updated driver. Driver File Details tab of selected camera device Rolling Back USB Camera Drivers Occasionally when the camera is in a non-working state, rolling back the driver can resolve the issue.
To roll back the driver: • From Driver details tab opened previously, click on the 'Roll Back Driver' button, and click 'Yes' when prompted. Selecting Roll Back Driver button When the rollback is complete, it is recommended that you reboot the system. If there is no option to roll back the driver (the button on the dialog box is not enabled, as seen in the image below) the next step is to try uninstalling the driver by clicking the Uninstall button from the Driver details tab. Camera driver tab with “Roll Back Driver” option unavailable Uninstalling USB Camera Drivers • If you tried the roll back workaround and that did not work, or you don't have the 'Roll Back Driver' option available, then you can attempt to uninstall the driver. From the same Driver tab that you opened in the roll back step, click the 'Uninstall' button. When prompted, check the checkbox next to 'Delete the driver software for this device', and then click 'OK' Selecting Uninstall with “Delete the driver software for this device” selected • After the driver is uninstalled, select the 'Scan for Hardware Changes' button in the Action menu.